Country:China>Hebei>hengshui
Wuqiang County, Hengshui City, Hebei Province
Company:Hengshui jinshida Machinery Manufacturing Co., Ltd
Mobile:
Tell13931832417
In order to ensure the normal operation of this welding machine, the welding machine should be placed in a place that is ventilated, dry, free of moisture, dust, acid, alkali and salt corrosion, and free of large vibrations. The ambient temperature should be -10℃ - +30℃, relative Use in an environment where the humidity does not exceed 65%. When the environmental conditions do not meet the above requirements, it may affect the normal operation of the equipment. In severe cases, it may cause failure of the welding machine and welding controller and delay the use of the user. The main engine of this welding machine can be placed on a relatively flat ground. If possible, it is better to use anchor screws to fix it, which can increase the working stability of the welding machine. Affect welding power and welding effect. The power supply used by this welding machine should meet the requirements of power supply voltage and frequency. Necessary protective measures should be taken when there are high-frequency electrical equipment near the welding machine. When the voltage fluctuation range of the power supply is relatively large, the welding quality of the workpiece may be affected. Because the welding power of the welding machine is relatively large, the corresponding knife switch and power cord must be installed in accordance with the requirements of Table 5. It is best for the welding machine to use an automatic air switch with leakage protection and overload protection device alone. Do not easily increase the knife The capacity of the switch fuse and the use of copper wire instead of the safety fuse, otherwise, when the welding machine fails, it will not have the proper protection, and it may even burn out the welding transformer and the control part of the welding machine. The power cord used should be made of copper conductors no smaller than the data in the table. In order to ensure the normal operation of the welding machine and the personal safety of the
Avoid fraud by meeting all sellers in-person to pay for items. BestB2B.COM does not offer any transaction or payment services.